Hans Schmidt Yarn Length Meter, LMC-V

Electronic length meter to measure the yarn consumption of a single yarn feeding system for one or more machine cycles of a circular knitting machine.
Measuring time is determined with start/stop signal of the magnetic sensor or manual by operator.

Special Features:
-    Length meter available for measuring cm (LMC) and inch (LMI)
-    Sensor controlled unit with a sensor (mounted on machine frame) and magnet (mounted on rotating part) for automatic start/stop signal
-    Precision, ball-bearing mounted wheel is recessed into an adjustable slot on the rear side
-    Material slip is eliminated by maximum enlacement of material (approx. 120°) with rubber coated wheel

Standard Features:
-    Easy to operate
-    Includes magnetic base for quick installation on the machine; it is stationary mounted on the zylinder ring between filament break monitors and filament guides
-    Battery operated length meter

Specifications:

	Model LMC-V	Model LMI-V
Measuring range:	1 - 999999 cm	1 - 999999 inch
Resolution:	1 cm	1 inch
Accuracy:	±0.1 % of displayed value ±1 digit	±0.1 % of displayed value ±1 digit
Measuring principle:	Pulse counting	Pulse counting
Preselect switch:	1 - 99 machine revolutions	1 - 99 machine revolutions
Display:	LCD, 5 mm high	LCD, 5 mm high
Auto power off:	After 2 min of non-use	after 2 min of non-use
Temperature range:	10 - 45 °C	10 - 45 °C
Air humidity:	85 % RH, max.	85 % RH, max.
Batterie:	2 x 1.5 V Typ AAA (approx. 30 h continuous use)	2 x 1.5 V Typ AAA (approx. 30 h continuous use)
Housing material:	Aluminium	Aluminium
Dimensions:	Instrument: 160 x 55 x 51 mm (LxWxH) magnetic base: high 190 mm, diameter 40 mm	Instrument: 160 x 55 x 51 mm (LxWxH) magnetic base: high 190 mm, diameter 40 mm
Weight:	Instrument: approx. 210 g; magnetic base: approx. 430 g complete with case (gross): approx. 1400 g	Instrument: approx. 210 g; magnetic base: approx. 430 g complete with case (gross): approx. 1400 g