Short Description
China Central Kagaku MLSS Meter Supplier Honest provides Central Kagaku MLSS Meters, low-battery-voltage warning display, automatic zero calibration.
Keywords: Meter,
 |
Previous: Central Kagaku Quick COD Meter, HC-607
Next: Central Kagaku Portable Dissolved Oxygen Meter, CGS-5
Next: Central Kagaku Portable Dissolved Oxygen Meter, CGS-5
Central Kagaku MLSS Meter, ML-54 Key Specifications / Features
The ML-54 MLSS meter is a portable sludge concentration meter that performs measurements of transmitted light to make simple on-site measurements of the concentration of activated sludge in sewage, waste, purification tanks and plant wastewater treatment systems and of sludge zone in nitrification and sedimentation tanks.
Features:
1. Sludge concentration and water depth can be measured simultaneously.
2. Automatic zero calibration functionality.
3. Extensive calculation functionality.
4. Sludge zone level detection (alarm on detection). Input the sludge zone concentration as a transmissivity percentage to obtain an alarm on reaching the sludge interface.
5. Low-battery-voltage warning display.
6. Automatic shutdown functionality for neglect to turn power off.
Power turns off automatically ten minutes after end of use (time to shutdown may be set by user).
7. Connect to printer (optional) to print measurement readings.
Specifications:
Features:
1. Sludge concentration and water depth can be measured simultaneously.
2. Automatic zero calibration functionality.
3. Extensive calculation functionality.
4. Sludge zone level detection (alarm on detection). Input the sludge zone concentration as a transmissivity percentage to obtain an alarm on reaching the sludge interface.
5. Low-battery-voltage warning display.
6. Automatic shutdown functionality for neglect to turn power off.
Power turns off automatically ten minutes after end of use (time to shutdown may be set by user).
7. Connect to printer (optional) to print measurement readings.
Specifications:
| Measurement method: | transmitted light |
| Measurement range: |
sludge density: 0-15000 mg/L water depth: 0-15m (10m standard cable) sludge zone: 10000mg/ L or more |
| Reproducibility: | Sludge density: readout ±3% Water depth: ±0.1m |
| Readouts | Concentration: LCD, 5 digits, 1 mg/L minimum Water depth: LCD, 3 digits, 0.1m minimum |
| Light source | LED |
| Sensor | Silicon photocell |
| calculations | JIS conversion, Y=aX+b Sludge volume index, SVI=SV% MILSS% Sludge return rate, r=SVI x MLSS% [100-(SVI x MLSS%)] Span, X=A x C/B Auto-zero |
| Specimen memory | 1-99 specimens |
| Error messages | Zero alignment failure, print failure, low battery voltage, EEPROM error |
| Power source | Nickel-hydrogen batteries (4 cells) Automatic shutdown functionality |
| Uptime | 20 hours continuous use |
